Metallographic Precision Laboratory Saws

Metallographic Precision Cutting Saws

[ Home ] [ Equipment Listing ] [ Manual Diamond saw ] [ Automated Diamond saw ] [ Precision Table feed saw ] [ Consumables ] [ Quote Request ]

MICRACUT 125 Low Speed Precision Cutter (Part Number 16-01) Variable speed from 0-600 rpm, utilizes wafering blade up to 5-inches (125 mm), digital micrometer, counter balanced feed, variable sliding load arm, automatic cut-off switch, with built-in coolant system.

Description	Specification
Cutting capacity	Max diameter 1.6" (40 mm)
Cut-off blade size	Max diameter 5" (125 mm)
Arbor size	0.5"
Variable Speed (rpm)	0–600 rpm continuously adjustable
Micrometer feed distance	0 to 1-inch (0-25 mm)
Micrometer accuracy	2 microns
Motor power	60 W
Electrical Specification	110V/ 60 Hz (single phase)
Dimensions W x H x D	12" x12" x 12"
Weight	29 lbs

Metallographic slow speed precision wafering saw

MICRACUT 150 Low Speed Precision Cutter (Part Number 16-03)
Variable speed from 0-1000 rpm, utilizes wafering blade up to 6-inches (150 mm), balde dressing tool, digital micrometer, counter balanced feed, variable sliding load arm, automatic cut-off switch, with built-in coolant system, option table feed for PCB boards.

Description	Specification
Cutting capacity	Max diameter 2" (50 mm)
Cut-off blade size	Max diameter 6" (150 mm)
Arbor size	0.5"
Variable Speed (rpm)	0–1000 rpm continuously adjustable
Micrometer feed distance	0 to 1-inch (0-25 mm)
Micrometer accuracy	2 microns
Motor power	90 W
Electrical Specification	110V/ 60 Hz (single phase)
Dimensions W x H x D	15" x 17" x 13"
Weight	77 lbs

MICRACUT 125/150 Fixtures and Accessories

Description	Part Number
Universal specimen vise	GR-0400
Sample holder wit double parallel vise for long specimens	GR-0401
Sample holder for round and mounted specimens (1.25-inch)	GR-0402
Specimen vise for irregular shaped specimens	GR-0403
Specimen vise for adhering specimens	GR-0404
Specimen vise for biomedical specimens	GR-0405
Swivel arm unit for angular cutting	GR-0406

Return to top

MICRACUT 175 Automated High Speed Diamond Saw (Part Number 17-01)
Microprocessor controlled, with variable cut-off wheel speed from 400 to 4000 rpm, 0.55 hp motor, 2-inch cutting capacity (4-inch with rotation), load application up to 6000 grams, automatic feeding with adjustable feed speed, mortorized positioning system with digital readout, positioning accuracy to 2 microns, touch-pad control panel for parameter settings, last settings retained in memory, with built-in sample rotation and recirculation cooling unit.

Description	Specification
Cutting capacity	Max diameter 2" (50 mm) w/o rotation 4" (100 mm) with rotation
Micrometer feed distance	0 to 1-inch (0-25 mm)
Positioning accuracy in x-direction	2 microns
Feed rate	0.024 to 3.54 inches/minute (0.010-1.5 mm/sec )
Cut-off blade size	Max diameter 7" (175 mm)
Arbor size	0.5"
Variable Speed (rpm)	400–4000 rpm continuously adjustable
Max. Load	6000 gms (60N)
Recirculating tank	1.2 gallons (4.5 liters)
Motor power	0.55 hp
Electrical Specification	110V/ 60 Hz (single phase)
Dimensions W x H x D	21" x 24" x 12.6"
Weight	180 lbs

Metallographic high speed precision wafering saw

MICRACUT 175 Fixtures and Accessories

Description	Part Number
Universal specimen vise	GR-0210
Specimen tear drop vise (0.60 to 0.79-inch)	GR-0430
Specimen tear drop vise (0.20 to 0.79-inch)	GR-0431
Specimen vise for irregular shaped specimens	GR-0432
Specimen vise for adhering specimens	GR-0433
Specimen vise for round cylindrical specimens (max. diameter 1.5 inch)	GR-0434
Specimen vise with accurate centering of specimens (up to 0.5-inch diameter)	GR-0435

Return to top

MICRACUT 200 Automated High Speed Table Feed Saw (Part Number 17-2)
Microprocessor controlled, with variable cut-off wheel speed from 400 to 4000 rpm, 1 hp motor, 4-8 inch abrasive, CBN or diamond wheels, feed rate 0.02-1.5 mm/second with automatic feedback loop to prevent overloading, 7.5" x 7.7" t-slot table, 1 gallon (4 liter) cooling tank, axis ranges: Z-45 mm, Y-180 mm, X-35 mm, and positioning accuracy to 2 microns with optional cross feed table).

Description	Specification
Abrasive wheel size	4" - 8"
Variable Speed (rpm)	400–4000 rpm continuously adjustable
Feed rate	0.0008" (0.02 mm) to 0.06" (1.5 mm/second)
Motor	1 hp
Cutting table dimensions	7.5" x 7.7" (190x196 mm)
Positioning ranges	Z: 1.8" (45 mm) Y: 7" (180 mm) X:1.4" (35 mm)
Recirculating tank	1 gallon (4 liters)
Electrical Specification	110V/ 60 Hz (single phase)
Dimensions W x H x D	25" x 29" x 16.5"

MICRACUT 200 Fixtures and Accessories

Description	Part Number
Universal specimen vise	GR-0210
Specimen tear drop vise (0.60 to 0.79-inch)	GR-0430
Specimen tear drop vise (0.20 to 0.79-inch)	GR-0431
Specimen vise for irregular shaped specimens	GR-0432
Specimen vise for adhering specimens	GR-0433
Specimen vise for round cylindrical specimens (max. diameter 1.5 inch)	GR-0434
Specimen vise with accurate centering of specimens (up to 0.5-inch diameter)	GR-0435
Automatic T-slotted table for digitial positioning and digital readout in the X-axis with 2 microns positioning accuracy	GR-05465
Stand for manual positioning in the X-axis. To be used together with specimen vises.	GR-0556
Quick acting clamping vise assembly	GR-0548
Vertical Clamping Device with clamping shoe	GR-1501
Flanges (set for 1/2" and 1" arbors) 3-inch (75 mm) 4-inch (100 mm)	GR-0410 GR-0411

Return to top

Equipment - Metallographic Precision Saws

Metallographic Laboratory Precision Saws

Metallography Lab Equipment

Metallography Support