Metallographic equipment and consumables best price guarantee
PACE Technologies Home Page for metallographic equipment and consumables for metallography

PACE Technologies Home Page | Home | Consumables | Equipment | Safety Data Sheets | Procedures | Etchants | Service | Contact us |

Metallographic Roll and Belt Grinder

Click here to get a quote
PENTA 5000 Hand Grinder PENTA 7500 belt grinder
Hand Grinder PENTA-5000 PENTA-7500
Grinding Process Manual Motorized
Abrasive 5-station
(240, 360, 400, 600, 800, 1200 grit)
Single Belt
(ZrO2 recommended)
Accessories   PENTA-7500 Squaring Sleeves

Return to top


PENTA-5000 5-Station Hand Grinder (NEW - BEST VALUE)

The PENTA-5000 5-station hand grinder (Part. No. PENTA-5000) offers a small lab the ability to prepare samples for macro viewing within minutes. The PENTA-5000 is a stationary grinder using 3-7/16 x 60-ft rolls set up for 240, 360, 600, 800 and 1200 grit abrasive.
.
Hand GrinderMetallographic Manual Hand Grinder Click here to get a quote  

Feature Specification
Grinding stations 240, 360, 600, 800 and 1200 grit silicon carbide rolls
Roll sizes 3-7/16-inch width x 60 feet length with 1 -inch core
Construction -Aluminum casting and stainless steel
-Hard coat anodized rollers and paper support plates
Cooling rinse system Water
Dimensions
(W x D x H)
22.25 x 21 x 8 -inch
(565 x 535 x 203 -mm)
Weight 55 lbs (25 kg)
 
Return to top

PENTA-7500 Belt Grinder (NEW - BEST VALUE)

The PENTA-7500 belt grinder (Part No. PENTA-7500) offers the ability to rapidly planarize a specimen or to grind it to the desired area of interest. The unique benefit the PENTA-7500 offers for planarizing specimen mounts, is especially useful for maintaining a square mount and minimizing the preparation time for automated polishing machines.
Microhardness testersMetallographic Microhardness Tester Click here to get a quote  

Feature Specification
Single belt 4 x 36-inch
(102 x 914 mm)
Electrical Specification 110V / 220V 50/ 60 Hz
Motor power 550 W (0.75 hp)
Cooling / rinse system Water
Construction Aluminum casting /
fabricated metal
Dimensions (W x D x H) 20 x 24.75 x 14.75 -inch
(510 x 630 x 375 mm)
Weight 120 lbs (53 kg)
 

Return to top


Click here to get a quote

PENTA-7500 Squaring Holder Sleeves

Accessories Part Number
1-inch sleeve for square holder (each) P75-100H
1.25-inch sleeve for square holder (each) P75-125H
1.5-inch sleeve for square holder (each) P75-150H
25 mm sleeve for square holder (each) P75-25H
30 mm sleeve for square holder (each) P75-30H
40 mm sleeve for square holder (each) P75-40H

Return to top

About Us | Site Map | Web Disclaimer | Terms and Conditions | Contact Us

Copyright 2006-2017
PACE Technologies ® - 3601 E. 34th St., Tucson, AZ 85713, USA
Telephone +1 520-882-6598 FAX +1 520-882-6599
All Rights Reserved


PACE Technologies facebook link   Blog us on Tumblr   Blog us on Tumblr   PACE Technologies Google+   PACE Technologies Google+   PACE Technologies Google+