Equipment - Metallographic Mounting Presses

TERAPRESS Automatic mounting press (NEW - BEST VALUE)
Pneumatic press with programmable mounting times up to 99 minutes with water cooling. Touch pad front panel controls for digital display of heating time, molding temperature, cooling temperature, ram up/down, and a direct reading pressure gage. Self contained bench design, integral heating and cooling, pressure up to 6000 psi, molding temperature 420F (200C), thermostatically controlled heating power of 1000 W, automatic cooling cycle and audiable cooling temperature or set cooling time control. Selectable mold sizes range from 1-inch to 2.0-inch diameter.

	Feature Specification Mount size 1 to 2-inch diameter Electrical Specification 110V / 220V 60 Hz Heating Specification 1000 Watts Thermostat range Max 420F (200C) Pressure 6000 psi Cooling system Water Dimensions (W x L x H) 12" x 16" x 26"
Automatic Press

METAPRESS-A
Automatic mounting press, fully automatic microprocessor controlled operation, touch pad front panel controls and digital display of heating time, molding temperature, cooling temperature, ram up/down, auto/manual cooling, cycle start/stop and a direct reading pressure gage. Molding pressure up to 4850 lbs force, molding temperature 460F (240C), thermostatically controlled heating power of 1500 W, automatic cooling cycle and audiable warning signal for end of cycle. Last molding parameter settings retaind in memory. Selectable mold sizes from 1-inch to 2-inch diameter.

	Feature Specification Mount size 1 to 2-inch diameter Electrical Specification 110V / 60 Hz Heating Specification 1000 Watts Thermostat range Max 420F (240C) Pressure 4850 lbs Cooling system Water Dimensions (W x L x H) 14.6 x 29" x 18"
Automatic Press

METAPRESS-P
Automatic airless mounting press, fully automatic microprocessor controlled operation, touch pad front panel controls and digital display of heating time, molding temperature, cooling temperature, ram up/down, auto/manual cooling, cycle start/stop and a direct reading pressure gage. Molding pressure up to 4850 lbs force, molding temperature 460F (240C), thermostatically controlled heating power of 1500 W, automatic cooling cycle and audiable warning signal for end of cycle. Last molding parameter settings retaind in memory. Selectable mold sizes from 1-inch to 2-inch diameter.

	Feature Specification Mount size 1 to 2-inch diameter Electrical Specification 110V / 60 Hz Heating Specification 1400 Watts Thermostat range Max 460F (240C) Pressure 4850 lbs Cooling system Water Dimensions (W x L x H) 14.6 x 29" x 18"
Automatic Press