Metallographic Composite Grinding Disk Information
Diamond Composite Disk Introduction
Composite grinding disks are an alternative to intermediate grinding and polishing. PACE Technologies composite disk vary slightly from other competitive products in that they are precharged with diamond. This allows the disks to cut faster and longer. Two disks types are available, the ORION composite polishing disk is precharged with 3 micron diamond, whereas the SIRIUS composite disk is precharged with 9 micron diamond.
The SIRIUS composites grinding disks offer an alternative to grinding with 320-600 grit SiC papers, and the ORION composite disk offer an excellent alternative to rough polishing with 3-6 micron diamond.
Application Guidelines (Composite Disks)
- Apply magnetic backed composite disk to reciever wheel
- Apply diamond suspension as required
- Rinse with water to clean plate
Trouble Shooting Guidelines (Composite Disks)
| Symptom | Cause | Action |
|---|---|---|
| Uneven grinding/polishing | Surface wearing out of flat | Replace disk and grind/polish with the head speed matching the base speed and running in the complementary direction |
| Large scratches or gouges in sample | Contaminated disk | Replace and use correct diamond suspension size |
Composite Disk Product Descriptions
| Description | Size | Catalog Number | Product Image | Close up Image |
|---|---|---|---|---|
| ORION Composite Disk precharged with 3 micron diamond (magnetic steel backing) |
8-inch 10-inch 12-inch |
ORION-MD08 ORION-MD10 ORION-MD12 |
 |
 |
| SIRIUS Composite Disk precharged with 9 micron diamond (magnetic steel backing) |
8-inch 10-inch 12-inch |
SIRIUS-MD08 SIRIUS-MD10 SIRIUS-MD12 |
 |
 |
Copyright 2006-2024
|
