Equipment - Quote Request

10"

3.14"

Manual

8.25" x 8.25"

10-01

10"

3.14"

Automatic

8.25" x 8.25"

11-01

14"-16"

4.72"

Manual

14.1" x 14.1"

12-03

14"-16"

4.72"

Automatic

14.1" x 14.1"

12-04

10"

3.54"

Manual

Manual

10.4" x 8.25"

14-01

10"

3.54"

Manual

Automatic

10.4" x 8.25"

14-02

14"

5.1"

Manual

Manual

16.2" x 13.8"

14-11

14"

5.1"

Automatic

Automatic

16.2" x 13.8"

14-12

18"

6.3"

Automatic

Automatic

22.8" x 18.9"

14-22

GR-0012

GR-0013

GR-0104

GR-0150

GR-0151

15-01

10-11

GR-0030

GR-0030

GR-0105

GR-0125

GR-0150

GR-0154

15-02

GR-0150

GR-0197

GR-0172

GR-0170

GR-0104

GR-0150

GR-0151

15-01

GR-0150

GR-0195

GR-0196

GR-0230

GR-0189

GR-0029

GR-0030

GR-0105

GR-0150

GR-0154

15-02

GR-0197

GR-0198

GR-0230

GR-0029

GR-0030

GR-0105

GR-0150

15-02

GR-0198

GR-0231

Low speed precision cutter, 40 W powerful DC motor, variable speed from 0-600 rpm, built-in micrometer, counterbalanced feed, automatic cut-off switch, with built-in coolant system and ready for operation

0-600 rpm

16-01

Precision cutter with touch pad controls, 90 W powerful DC motor, variable speed 0-1000 rpm, digital micrometer, counterbalanced sliding weight, utilizes up to 6-inch diameter wafering blades

0-1000 rpm

16-03

GR-400

GR-401

GR-402

GR-403

GR-404

GR-405

GR-406

GR-0212

Automatic high speed precision cut-off saw, microprocessor controlled, with variable cut-off wheel speed from 400 to 4000 rpm, 0.55 HP motor, 2-inch (50 mm) cutting capacity (4-inch or 100 mm with rotation), load application up to 60 N, automatic feeding with adjustable feed speed, motorized positioning system with digital readout, positioning accuracy 2 microns, touch-pad control panel for parameter settings, last settings retained in memory, with built-in sample rotation, with recirculation cooling unit, complete and ready for operation. Specimen vises sold separately (110 V)

400-4000 rpm

17-01

Microprocessor controlled, with variable cut-off wheel speed from 400 to 4000 rpm, 1 hp motor, 4-8 inch abrasive, CBN or diamond wheels, feed rate 0.02-1.5 mm/second with automatic feedback loop to prevent overloading, 7.5" x 7.7" t-slot table, 1 gallon (4 liter) cooling tank, axis ranges: Z-45 mm, Y-180 mm, X-35 mm, and positioning accuracy to 2 microns with optional cross feed table).

400-4000 rpm

17-02

GR-0210

GR-401

GR-430

GR-431

GR-432

GR-433

GR-434

GR-0210

GR-0430

GR-0431

GR-432

GR-433

GR-434

GR-435

GR-05465

GR-0556

GR-0548

GR-1501

GR-0410

GR-0411

METAPRESS

Manual

10,000 lb (5 ton capacity), direct reading pressure gage, automatic timer, digital display of time and temperature, self contained bench top design, integral heating and cooling unit, thermostatically controlled heating power of 1400 W, automatic cooling cycle, with audible warning signal and ready for operation (110 V, 60 Hz)

20-01

METAPRESS-A

Automatic

Fully automatic operation with microprocessor control, with touch pad ront panel controls and digital display of heating time, molding temperature, cooling temperature, ram/up down auto/manual cooling, cycle start/stop, with direct reading pressure gage, molding pressure up to 4850 lbs (330 bar), molding temperature up to 505°F (250°C), thermostatically controlled heating power of 1400 W, automatic cooling cycle, selectable mold sizes from 1-inch (25 mm) to 2-inch (50 mm), audible warning signal, last parameter setting retained in the memory, with all necessary hoses, fittings and cables for installation, ready for operation (110 V, 60 Hz)

20-02

HYDROPRESS

Automatic

Automatic airless mounting press, fully automatic microprocessor controlled operation, touch pad front panel controls and digital display of heating time, molding temperature, cooling temperature, ram up/down, auto/manual cooling, cycle start/stop and a direct reading pressure gage. Molding pressure up to 4850 lbs force, molding temperature 460°F (240°C), thermostatically controlled heating power of 1500 W, automatic cooling cycle and audiable warning signal for end of cycle. Last molding parameter settings retaind in memory. Selectable mold sizes from 1-inch to 2-inch diameter (110 V, 60 Hz)

25-03

DIGIPRESS

Prgrammable / Automatic

DIGIPRESS programmable automatic mounting press. Features microprocessor control, program based mounting sequences, hydro-pneumatic drive system, programmable pressure up to 4850 lbs (330 bar), programmable temperature up to 490°F (240°C) and programmable operation time up to 9:99 minutes, thermostatically controlled heating power of 1400 W, automatic cooling cycle, programmable preheating and preloading, selectable mold sizes from 1-inch (25 mm) to 2-inch (50 mm), audible warning signal, large LCD screen and touch-pad front panel, ready for operation (110 V, 60 Hz)

25.01

8" or 10" Single wheel, bench top, single speed polisher

300 rpm

30-01

8" or 10" Single wheel, bench top, variable speed polisher

50-600 rpm

30-02

8" or 10" Double wheel, bench top, single speed polisher

300 rpm

30-03

8" or 10" Double wheel, bench top, variable speed polisher

50-600 rpm

30-04

10" or 12" Single wheel, bench top, variable speed polisher

50-600 rpm

30-06

8" or 10" Double wheel, bench top, individual motors

150/300 rpm

30-07

8" or 10" Single wheel, bench top, variable speed polisher

50-600 rpm

35-03

8" or 10" Double wheel, bench top, variable speed polisher

50-600 rpm

35-04

10" or 12" Double wheel, bench top, variable speed polisher

50-600 rpm

35-05

31-01

31-21

31-31

31-02

31-22

31-32

31-03

31-23

31-33

31-04

31-24

31-34

31-05

31-25

31-35

31-06

31-26

31-36

GR-0120

30-08

30-09

45-01

45-02

32-03

33-04

33-05

31-01

33-04

33-05

33-07

33-06

45-14

45-15

45-16

45-10

45-35

45-36

45-37

45-30

45-51

45-55

45-56

45-58

45-59

40-01

40-11

40-12

40-13