Wafer Polishing Characteristics
Pace Technologies offers a selection of felt polishing pads comparable to the POLITEX (BLACKCHEM 2), SUBA 500, SUBA V, SUBA IV, GS, SUBA X and natural wool polishing pads that are found in the industrial polishing market today.
BLACKCHEM 2BLACKCHEM 2 is a replacement polishing pad for the POLITEX polishing pad (see comparision table below). Its main application is for CMP polishing with alumina or colloidal silica. The BLACKCHEM 2 also has a very similar and porous structure as the POLITEX pad.
|
Properties |
PACE |
RODEL |
|
Thickness in mm |
1.369 |
1.471 |
|
Weight g/m2 |
583.1 |
582.6 |
|
Hardness Shore A |
66 |
61 |
|
Compressibiity in % |
|
|
|
Surface resistance in mg |
|
|
|
Pores volumes of open pores in % |
68.6 |
78.1 |
|
Average pore size in um |
40.6 |
55 |
|
Wetting angle (against water) |
|
|
 |
|
| Pore structure for BLACKCHEM 2 (SEM 300X). | Pore structure for POLITEX (SEM 300X). |
|
|
| Cross section for BLACKCHEM 2 (SEM 100X). | Cross section for POLITEX (SEM 100X). |
PC Impregnated Felt Polishing Pads
The PC series of polishing pads are replacement polishing pads for the SUBA series of polishing pads (see comparision table below). There main polishing application is for glass, ceramics, precision optics and other materials where surface finish is critical.
|
PACE |
Replaces |
Specific Gravity |
Durometer Hardness |
Thickness |
Max size |
|
PC80 |
SUBA 500 |
0.58 |
>C80 |
0.050" - 1" |
39.5" x 39.5" |
|
PC60 |
SUBA V |
0.40 |
>C60 |
0.050" - 1" |
39.5" x 39.5" |
|
PC40 |
SUBA IV |
0.34 |
C40 |
0.090" - 1" |
53" x 53" |
|
PC55-LD |
SUBA X |
0.32 |
C55 |
0.050" - 1" |
39.5" x 39.5" |
|
PC55-HD |
SUBA X |
0.42 |
C55 |
0.050" - 1" |
39.5" x 39.5" |
|
PC20 |
Natural wool |
0.31 |
C20 |
1/8" - 1" |
53" x 53" |
 |
 |
|
| PC60 Embossed Polishing Pad | PC60 Perforated Polishing Pad |
Recommended Application
The following is a list of recommendations to maximize the performance of the polishing or lapping operations.
- Match the polishing pad characteristics to the material to be polished
- Charge the abrasive to the polishing surface
- Use a polishing lubricant designed to remove polishing or grinding swarf. This can significantly increase the life and performance of the polishing surface