RC-1000A Metallographic Filtering System
The RC-1000A Filtering system is designed to filter out the grinding and polishing swarf that is produced during metallographic specimen preparation. This allows for removing solids for a more environmentally friendly metallography lab.
- Coarse Filtering: 2-straining filters
- Fine Filers :0.2, 0.5 and 1 micron
- Pump: 24V DC Diaphragm Pump,
1.3 GPM (5 L/min)
- Volume of Tank: 14 gallons (53 L)
- Electrical Specifications: 110V or 220V 50/60 Hz
- Dimensions (WxDxH):
31.5 x 16.5 x 19.5-inch
(800 x 450 x 495 mm)
- Weight: 30 lbs (14 kg)
- Part No.: RC-1000A