 |
 |
 |
Metallographic Compression Mounting Presses
 |
 |
|
|---|---|---|
| Compression Mounting Presses | TERAPRESS TP-7100S | TERAPRESS TP-7500S |
| Force | Pneumatic | Electro-Hydraulic |
| Mold Cylinders | Single | Single |
| Mold Assemblies and Spacers | TP-7100S molds | TP-7500S molds |
TERAPRESS TP-7100S Pneumatic Automatic Mounting Press (BEST VALUE)
The TERAPRESS TP-7100S automated air pressure mounting press (Part No. TP-7100S) has a solid, easy-to-use, robust design. The TERAPRESS TP-7100S offers users more control for both the heating and cooling cycle as compared to most competitive compression mounting presses. By using air pressure to maintain a constant force on the specimen, the requirement to continually monitor and increase the force as the resin begins to melt is eliminated. Molds can be a fixed size for more efficiency or interchangeable for easy changing of mold sizes.
|
|
TERAPRESS TP-7500S Hydraulic Mold Mounting Press
The TERAPRESS TP-7500S programmable electro-hydraulic automated mounting press (Part No. TP-7500S) has a solid, easy to use, robust design. With electro-hydraulic force and heating up to 200°C, molding is very efficient. Molds can be a fixed size for more efficiency or interchangeable for easy changing of mold sizes.
|
|
Molds and Accessories for TERAPRESS Compression Mounting Presses
| Interchangeable Molds | Part Number (Flat Ram) | Part Number (Chamfered Ram) |
|---|---|---|
| 1-inch diameter mold assembly | TP75-0100 | TP75-0100C |
| 1.25-inch diameter mold assembly | TP75-0125 | TP75-0125C |
| 1.5-inch diameter mold assembly | TP75-0150 | TP75-0150C |
| 2-inch diameter mold rams | TP75-0200 | TP75-0200C |
| 25 mm diameter mold assembly | TP75-25 | TP75-25C |
| 30 mm diameter mold assembly | TP75-30 | TP75-30C |
| 40 mm diameter mold assembly | TP75-40 | TP75-40C |
| Fixed Size Molds | Part Number (Flat Ram) | Part Number (Chamfered Ram) |
|---|---|---|
| 1-inch diameter fixed heater / cooler assembly | TP75-0100H | TP75-0100HC |
| 1.25-inch diameter fixed heater / cooler assembly | TP75-0125H | TP75-0125HC |
| 1.5-inch diameter fixed heater / cooler assembly | TP75-0150H | TP75-0150HC |
| 2-inch diameter fixed heater / cooler assembly | TP75-0200H | TP75-0200HC |
| 25 mm diameter fixed heater / cooler assembly | TP75-25H | TP75-25HC |
| 30 mm diameter fixed heater / cooler assembly | TP75-30H | TP75-30HC |
| 40 mm diameter fixed heater / cooler assembly | TP75-40H | TP75-40HC |
| 50 mm diameter fixed heater / cooler assembly | TP75-50H | TP75-50HC |
| TERAPRESS Mold Spacers | Part Number (Flat Ram) | Part Number (Chamfered Ram) |
|---|---|---|
| 1-in spacer for double mounts | TPS-0100 | TPS-0100C |
| 1.25-in spacer for double mounts | TPS-0125 | TPS-0125C |
| 1.5-in spacer for double mounts | TPS-0150 | TPS-0150C |
| 2-in spacer for double mounts | TPS-0200 | TPS-0200C |
| 25 mm spacer for double mounts | TPS-25 | TPS-25C |
| 30 mm spacer for double mounts | TPS-30 | TPS-30C |
| 40 mm spacer for double mounts | TPS-40 | TPS-40C |
| 50 mm spacer for double mounts | TPS-50 | TPS-50C |
Recirculating-Coolant System (Optional)
The TP-TANK recirculating / coolant tank is a environmentally efficient unit that significantly reduces the water requirement for cooling the TERAPRESS compression mounting presses. The TP-TANK is a self contained cooling system designed for the TERAPRESS compression mounting presses.
|
|
Copyright 2006-2022
PACE TECHNOLOGIES® -
3601 E. 34th St., Tucson, AZ 85713,
USA
Telephone +1-520-882-6598 FAX +1-520-882-6599
All Rights Reserved
