PACE Technologies Banner logo

PACE Technologies Metallographic Preparation CLASS Chart icon

Manganese Aluminum Bronze
Specimen Preparation (Class 1 Procedures)
Metallographic Class 1 sample preparation  

Manganese-aluminum bronze is a relatively harder bronze because of the addition of manganese. Microstructural preparation of this material is relatively straight forward.

SECTIONING
MAXCUT Abrasive blade (MAX-C or MAX-I series)

MOUNTING
Compression Mounting with Phenolic, Epoxy or Diallyl Phthalate compression mounting resins

POLISHING
Abrasive/surface Lubricant Force/ sample Speed
(Head/base)
Time Individual
Force mode
Central Force
mode
120 grit SiC paper*
240 grit SiC paper*
Water
5-10 lbs 200/200 rpm Planar
1 min
  Metallographic central polishing force
360 grit SiC paper
600 grit SiC paper
800 grit SiC paper
1200 grit SiC paper
Water
5-10 lbs 200/200 rpm 1 min
1 min
1 min
1 min
Metallographic individual polishing force Metallographic central polishing force
6 um DIAMAT diamond on
TEXPAN polishing pad
DIALUBE Purple
Extender
5-10 lbs 200/200 rpm 2 min Metallographic individual polishing force Metallographic central polishing force
1 um DIAMAT diamond
on GOLDPAD or
ATLANTIS polishing pad
DIALUBE Purple
Extender
10 lbs 200/200 rpm 2 min Metallographic individual polishing force Metallographic central polishing force
0.05 um Nanometer alumina
on NAPPAD polishing pad
  5-10 lbs 100/100 rpm 1 min Metallographic individual polishing force Metallographic central polishing force

*Required for central polishing force. Click here for more information on central vs. individual polishing force polishing.

Metallographic micrograph of Nickel Iron Bronze
Mangnese-Aluminum Bronze, 400X DIC
(etchant: ammonium persulface, HCl, DI Water)

ETCHING

Common Etchants
PACE Technologies Recommended Etchants

PACE Technologies Etchant Database

CAUTION:Safety is very important when etching. Be sure to wear the appropriate protective clothing and observe all WARNINGS on chemical manufacuters SDS (Safety Data Sheets). Also review the COMMENTS and CONDITIONS Section for each etchant.


Copyright 2006-2024
PACE TECHNOLOGIES® - 3601 E. 34th St., Tucson, AZ 85713, USA
Telephone +1-520-882-6598 FAX +1-520-882-6599
All Rights Reserved

PACE Technologies facebook link Blog us on Tumblr Blog us on Tumblr PACE Technologies LinkIn PACE Technologies YouTube Videos