Metallographic Image Analysis Software
PACE Technologies Banner logo

Image Analysis Software




Click here to get a quote

Metallographic Image Analysis

Metallographic Image Analysis Modules

Our range of Image analysis systems provide a single fully integrated analytical tool for study and documentation of microstructures using fast and automatic image processing techniques. Quantification of phases ( ASTM E566, ASTM 1245 ), inclusions ( ASTM E454 / E1245 ), Grain Size ( ASTM E112 ), Nodularity (ASTM A247), Porosity (ASTM A276), Decarburization (ASTM E1077), and coating thickness (ASTM B487) is achieved by capturing the picture through a high resolution color digital camera interfaced to the camera port of the metallurgical microscope. The image is imported onto a Pentium based PC by a specially designed image acquisition card for preview and storage.

Measurements (click on module link in table below for more details)

Image Analysis
Materials Plus Camera Video Materials Plus Settings Video Materials Plus Calibration Video Materials Plus Measurement Video Materials Plus Grain Size Video
Materials Plus Gray Cast Iron measurement Video Materials Plus Spherical Cast Iron Video Materials Plus Carbide Video Materials Plus Porosity Video Materials Plus Inclusoin Video
Materials Plus Coating Thickness Video Materials Plus Spherodization Video Materials Plus Decarburization Video Materials Plus Segmentation Video Materials Plus Report Generation Video




WELD CHECK Analysis Module

Weld Check software is a powerful, easy-to-use tool that enhances the ability to quickly and efficiently measure critical welding features such as fillet welds, throat, leg lengths and penetration (part no. WELD-CHECK).

Welding Features:
-Leg Lengths
-Depth of Penetration
-Throat Height
-Root size
-Angle measurements
-Plate thickness and % weld penetration
-Toe undercut
-Face and Root reinforcement thickness

Weld check Click here to get a quote

Return to top


HARDNESS PRO Analysis Module

Hardness Pro is a powerful, easy-to-use tool that enhances the ability to quickly and efficiently measure indent size and convert to a hardness value (part no. HARDNESS PRO).

-Automatic or Interactive measurement of Vickers, Knoop and Brinell Indents
-Manual measurement on live image or acquired image
-Automated calculation of the best circumference minimizes the average quadratic error
I-mage acquisition in high resolution 64-bit Colors
I-n the event, that the automatic measurement fails, the program offers the possibility to manually measure through the acquisition of three points in Brinell, D1 and D2 in Vickers and Simple L in Knoop
-Accuracy up to 0.001 µm
-Multi-field analysis
-Case Hardness depth (CHD) measurement is automatic

Hardness Pro Software Click here to get a quote

Return to top

Copyright 2006-2024
PACE TECHNOLOGIES® - 3601 E. 34th St., Tucson, AZ 85713, USA
Telephone +1-520-882-6598 FAX +1-520-882-6599
All Rights Reserved

PACE Technologies facebook link Blog us on Tumblr Blog us on Tumblr PACE Technologies LinkIn PACE Technologies YouTube Videos